Strobon Standalone is a good navigation strobe solution for enclosed drones like DJI Phantom, DJI Inspire, 3DR Solo, Walkera and others.
No cabling required. Just attact it to your drone or model airplane with your favorite glue or velcro, press the button to turn it ON. That's all.
5 hours continuous operation with onboard battery.
Powerful 3W LED
No Cabling required
Easy to use single button interface.
On board battery status and charge indicator system.
Compatible with all 5V MicroUSB cables and chargers.(cable not included)
Contact Pads(L+ and L-) for the external LED support.
Battery with internal overcharge and discharge protection.
BATTERY STATUS: Press the button then release to learn battery status when it is OFF. (1 blink:Need Charge, 2 blink: It's OK, 3 blink: Fully Charged)
ON/OFF: Press and hold the button for 3 seconds to turn ON or OFF
CHARGE: Plug it to any micro USB charger or computer port when charging required. - The LED will blink with very short bursts when charging. - The LED will blink with 1 second ON / 2 seconds OFF pattern when the battery is fully charged. It takes 2 hours for empty batteries.
Notice: The battery includes it's own PCM module. This module protects the battery from overcharge and discharge for long lifespan. If there is no life sign on the circuit when you press the button, probably discharge protection has activated because of low battery voltage. Just charge it.
Dimensions: 22mm x 18mm x 10mm
Current Consumption: <15mA per hour
Charge Port: MicroUSB
Charge Current: 40mA max.
Charge Time: ~2 hours
Battery Type: 70mA LiPo Battery with safe and reliable PCM circuit.