ESP-32S with Transfer Board - New

ESP-32S with Transfer Board - New

Regular price $6.99 $1.00 Sale

he ESP-32S Wi-Fi/Bluetooth module combines high wireless performance with low-power consumption in a deeply integrated and prototyping friendly SoM. Based on the ESPRESSIF ESP32 chipset, this module integrates a dual-core Xtensa 32-bit processor with 448 KBytes of ROM, 520 KBytes of SRAM, an RTC, 802.11 b/g/n/e/I Wi-Fi, Bluetooth v4.2 BR/EDR & BLE, clocks, timers, and a hardware crypto engine.

 

ESP32

ESP32 is a brand new single chip 2.4 GHz Wi-Fi and Bluetooth combo chip designed with TSMC ultra low power 40 nm technology that is the successor to the legendary ESP8266. It is optimized for the best power and RF performance, robustness, versatility, features and reliability, for a wide variety of applications, and different power profiles. This is a brand new part and the documentation in English is not yet complete which makes this a perfect part to group buy and collaboratively hack on.

ESP32 is the most integrated solution for Wi-Fi + Bluetooth applications in the industry with less than 10 external components. ESP32 integrates the antenna switch, RF balun, power amplifier, low noise receive amplifier, filters, and power management modules. As such, the entire solution occupies minimal Printed Circuit Board (PCB) area.

ESP32 is designed for mobile, wearable electronics, and Internet of Things (IoT) applications. It has many features of the state-of-the-art low power chips, including fine resolution clock gating, power modes, and dynamic power scaling.

 

Note

This module is not recommended for new designs, only experimentation. The supply chain for this part is wildly unpredictable and we do not intend to stock more.

 

Features/Specifications

  • WiFi
    • 802.11 b/g/n/e/i
    • 802.11 n (2.4 GHz), up to 150 Mbps
    • 802.11 e: QoS for wireless multimedia technology.
    • WMM-PS, UAPSD
    • MPDU and A-MSDU aggregation
    • Block ACK
    • Fragmentation and defragmentation
    • Automatic Beacon monitoring/scanning
    • 802.11 i security features: pre-authentication and TSN
    • Wi-Fi Protected Access (WPA)/WPA2/WPA2-Enterprise/Wi-Fi Protected Setup (WPS)
    • Infrastructure BSS Station mode/SoftAP mode
    • Wi-Fi Direct (P2P), P2P Discovery, P2P Group Owner mode and P2P Power Management
    • UMA compliant and certified
    • Antenna diversity and selection
  • Bluetooth
    • Compliant with Bluetooth v4.2 BR/EDR and BLE specification
    • Class-1, class-2 and class-3 transmitter without external power amplifier
    • Enhanced power control
    • +10 dBm transmitting power
    • NZIF receiver with -98 dBm sensitivity
    • Adaptive Frequency Hopping (AFH)
    • Standard HCI based on SDIO/SPI/UART ? High speed UART HCI, up to 4 Mbps
    • BT 4.2 controller and host stack
    • Service Discover Protocol (SDP)
    • General Access Profile (GAP)
    • Security Manage Protocol (SMP)
    • Bluetooth Low Energy (BLE)
    • ATT/GATT
    • HID
    • All GATT-based profile supported
    • SPP-Like GATT-based profile
    • BLE Beacon
    • A2DP/AVRCP/SPP, HSP/HFP, RFCOMM
    • CVSD and SBC for audio codec
    • Bluetooth Piconet and Scatternet
  • Clocks and Timers
    • Internal 8 MHz oscillator with calibration
    • Internal RC oscillator with calibration
    • External 2 MHz to 40 MHz crystal oscillator
    • External 32 kHz crystal oscillator for RTC with calibration
    • Two timer groups, including 2 x 64-bit timers and 1 x main watchdog in each group
    • RTC watchdog
  • Peripheral Interface
    • 12-bit SAR ADC up to 18 channels
    • 2 × 8-bit D/A converters
    • 10 × touch sensors
    • Temperature sensor
    • 4 × SPI, 2 × I2S, 2 × I2C, 3 × UART
    • 1 host (SD/eMMC/SDIO), 1 slave (SDIO/SPI)
    • Ethernet MAC interface with dedicated DMA and IEEE 1588 suppor
    • CAN 2.0
    • IR (TX/RX)
    • Motor PWM, LED PWM up to 16 channels
    • Hall sensor
    • Ultra low power analog pre-amplifier
  • Security
    • IEEE 802.11 standard security features all supported, including WFA, WPA/WPA2 and WAPI
    • Secure boot
    • Flash encryption
    • 1024-bit OTP, up to 768-bit for customers
    • Cryptographic hardware acceleration: -AES-HASH(SHA-2) library-RSA-ECC-Random Number Generator (RNG